Monday, October 18, 2021

Chibi Lycanroc Dusk Form

 




Commentary:
It is an orange version of Midday Lycanroc with a little bit more fleshed out mane... that is all I got for this Pokemon.

Fun Fact:
1. The Dusk form resembles a combination of its Midday and Midnight form. It has the calm demeanor of Midday, but also has the Midnight form's fighting spirit.
2. Compared to the other Lycanroc forms, the dusk form has stats almost identical to the Midday form with the Dusk form having a higher attack at 117 compared to 115 while the Midday form is a little faster with the speed stat of 112 compared to the dusk form with the speed of 110.
3. It has a signature move called accelerock. 

Pokedex Entry:
According to the Pokedex, Dusk form Lycanroc is very rare in Alola as it evolves at dusk. This Pokemon is also calm and quiet, but once a battle starts, it displays a ferocious fighting spirit. Hmmm🧐 makes sense why in compared to the other Lycanroc forms, the Dusk form can have the ability vital spirit.

Model Details:
Pages: 1
Height: 2.17 in / 5.50 cm
Width: 2.30 in / 5.84 cm
Depth: 3.10 in / 7.87 cm
Download: 3D Model / Templates
Notes: Down below I have included a video of me making the model. If you want to build it yourself, you can download the templates and follow along at 0.25x speed. Do not forget to place a small weight in the model so the model can stand by itself. Besides that, I hope you enjoy building and stay tuned!



Friday, October 15, 2021

Chibi Gothita

 




Commentary:
Never used this Pokemon, and do not like the design of this Pokemon. Just one of those Pokemon 
that is just there. Also I prefer Solosis over this Pokemon😅.

Go check out Paperpokes in which I helped make a bigger and more detail version of this model. You can find them at http://www.pokemonpapercraft.net/2021/10/gothita.html


Fun Facts:
1. The bow-shaped feelers amplify Gothita's psychic power.
2. Its arms and legs do not have any fingers or toes. (Makes the Rumble model more realistic)

Pokedex Entry:
Well Gothita has quite a consistent entry. According to the Pokedex Gothita's bow-shaped feelers store and amplify its psychic power. Furthermore, Gothita intently observe trainers and Pokemon. It is said that Gothita is looking at something at it can only see.

Model Details:
Pages: 1
Height: 2.00 in / 5.08 cm
Width: 1.26 in / 3.20 cm
Depth: 1.20 in / 3.05 cm
Download: 3D Model / Templates
Notes: Down below I have included a video of me making the model. If you want to build it yourself, you can download the templates and follow along at 0.25x speed. I have included small spikes in the templates. Fiddle with the positioning and attachment of these spikes to the back of the legs to allow the model to stand by itself. I figure this is a simpler way to get the model to stand by itself than I had previously suggested. Besides that I hope you enjoy building and stay tuned!😁



Wednesday, October 13, 2021

Chibi Primal Groudon






Commentary:
Pretty cool form to normal Groudon as it looks like it has lava in its design. Besides that, all I know is that Primal Groudon automatically has the ability Drought and was used quite heavily in competitive Pokemon. According to Smogon, Primal Groudon was considered in Ubers tier as it could run multiple different sets such stealth rocks and swords dance, a complete defensive support Pokemon with toxic and stealth rocks, mixed attacker with rock polish, mixed attacker with swords dance, and a double dance set that runs rock polish and swords dance. Yeah Groudon could play multiple different roles succesfully based on whatever role you wanted it to be. Makes sense why it is in Ubers.

Fun Facts:
Primal Groudon is said to create land with every step it takes.

Pokedex Entry:
According to the Pokedex, through Primal Reversion, Groudon can cause magma to erupt and expand the landmass of the world. Just typical Groudon stuff you typically would expect from it

Model Details:
Pages: 2
Height: 3.70 in / 9.40 cm 
Width: 2.47 in / 6.27 cm
Depth: 5.09 in / 12.93 cm
Download: 3D Model / Templates
Notes: Down below I have included a video of me making the model. If you want to build it yourself, you can download the templates and follow along at 0.25x speed. This model's structure is basically idetical to the normal Groudon model so if you were able to successfully make that model you should be able to successfully make this one. Besides that I hope you enjoy building and stay tuned!



Monday, October 11, 2021

Snow Pea

 



Commentary:
One of my favorite plants in Plants vs Zombies. It may not be one of the best plants to use but when I was younger I thought this plant was amazing. I remember I thought I could put a torch wood in front of it increase the damage, but it just made it an expensive peashooter. Pretty cool detail from the creators, but it makes the most sense.

Fun Facts:
In the PVZ facebook game the Snow pea has a VIP variant known as the Queen Snow pea which had a longer range and dealt more damage.

In the PVZ 2: Garden game the snow pea can appear in forms of twopeaters and threepeaters.

Entry:
The Snow Pea acts like a normal peashooter but has the ability to slow down or freeze zombies.

Model Details:
Pages: 2 -- 7
Height: 3.00 in / 7.62 cm -- 6 in / 15.24 cm
Depth: 2.74in / 6.96 cm -- 5.48 in / 13.92 cm
Width: 2.01 in / 5.11 cm -- 4.02 in / 10.21 cm
Download: 3D Model / Templates
Notes: I have provided two sizes and once again the bigger the model the easier it is to build. Unfortunately, I forgot to save the 6in PDO file of the model, but all of the pieces are there. The general way I built this model was I first built the head from the cannon back toward the spikes. I attached the eyes and eyebrows when I got to that section of the head. Once closed, I built the spikes at the back of the head starting with the middle spike and working my way out. I then built the neck spikes and neck section and attached it to the head. I then build the leaves putting a weight in EACH leaf so the model can stand  by itself. I then layered the leaves to create a single base and glued the neck and head to it. You will need to rest the upper body section while the glue the is drying, however, if enough weight is in the leaves the model should stand by itself once it is dry. Besides that I hope you enjoy building and stay tuned!

Friday, October 8, 2021

Chibi Rockruff

 



Commentary:
I like the concept of this Pokemon as it can evolve into different forms based on the time of day, and it is a cute looking dog so what can go wrong. The one thing that surprised me about Rockruff is that it is a rock type. After looking at midday Lycanroc, I guess it makes sense that Rockruff is a rock type, but in my opinion I thought it was a normal type.

Fun Facts:
1. On Bulbapedia, Rockruff has a footprint that looks like a question mark. I do not know if that is accurate as Rockruff's paw looks like any dog's typical paw.
2. Rockruff has been known to fight with Growlithe over territory. (Pretty cool fact)
3. Once Rockruff is close to evolving, it will begin to howl when the sun goes down (Okay makes sense)

Pokedex Entry:
According to the Pokedex, Rockruff has lived with humans "since times long ago" and can strongly bond with its trainer that it can realize when its trainer is in the dumps and it will stick by the trainer's side. Unfortunately that ends the commonality with dogs. As Rockruff grows up, it becomes rougher and rougher and becomes harder to raise. Many trainers find it difficult to deal with Rockruff and abandon them 😢.

Model details:
Pages: 1
Height: 1.80 in / 4.57 cm
Width: 1.51 in / 3.84 cm
Depth: 2.29 in / 5.82 cm
Download:  3D Model / Templates
Notes: Down below I have included the video of me making the model. You can play the video at .25x speed and follow along if you want to. A few things to make note of when building this model. Make sure to place a weight in the model can stand by itself. Furthermore, I did not want want to build the black parts of the collar, but I have included it in the templates. If you want to build them I would recommend building them after gluing the bottom collar part to the body. Therefore you would build the bottom collar, black parts, then the top collar and then lastly gluing the head. I hope you enjoy building and stay tune!🙂



Wednesday, October 6, 2021

Chibi Primal Kyogre

 



Commentary: 
I do not know anything about this Pokemon is that Primal Kyogre has the ability drizzle and was kind of overpowered in double battles counting it was in the Ubers-tier. According Smogon, Primal Kyogre had a lot of sets. It could be a physical attacker, a special attacker, defensive or even set up with calm mind and wreck with water spout. Counting it could be any of these sets, it makes sense it was placed in Ubers-tier.

Fun Facts:
When Kyogre reverts back to its primal version, it doubles in size. Furthermore, the white parts of its body becomes translucent revealing its organ like structure. Yeah you won't be seeing the inner structure in this model

Pokedex Entry:
Luckily there is only one Pokedex entry for Primal Kyogre. According to the Pokedex, when it experiences primal reversion it turns back to its true form and it can summon storms that raise the sea level. Sounds like normal Kyogre powers.

Model Details:
Pages: 2
Height: 2.00 in / 5.08 cm
Width: 5.41 in / 13.74 cm
Depth: 6.25 in / 15.88 cm
Download: 3D Model / Templates
Notes: This model is not difficult to build at all as you just build the main body and then attach the fins. I have included a video down below just in case you are too building. I hope you enjoy building and stay tuned!


Monday, October 4, 2021

Chibi Lycanroc Midday

 




Commentary:
I used Lycanroc a few times in Showdown as a fast physical sweeper with a choice scarf. That is all I know about this Pokemon.

Fun fact:
1. The midday form is influenced by Solgaleo when bathed in solar energy.
2. The midday form has a calm and cautious personality. It prefers to live alone to avoid needless fighting.
3. It has a signature move called accelerock. 

Pokedex Entry:
According to the pokedex, Midday Lycanrock in battle Lycanroc uses quick movements to confuse its opponents, and has rocks on its mane that can cut as knives. Unlike Rockruff, who becomes more violent and difficult to raise when it grows older, if raised from a young age Midday Lycanroc can become a trustworthy partner that will never betray its trainer 

Model Details:
Pages: 1
Height: 1.85 in / 4.70 cm
Width: 2.24 in / 5.69 cm
Depth: 3.02 in / 7.67 cm
Download: 3D Model / Templates
Notes: Down below I have included a video of me making the model. If you want to build it yourself, you can download the templates and follow along at 0.25x speed. Do not forget to place a small weight in the model so the model can stand by itself. Besides that, I hope you enjoy building and stay tuned!


Friday, October 1, 2021

Pokemon Trainer Blue

 





Commentary:
I mean its Blue. The "Smell Ya Later" guy. I do not know why he says its but I have start to like the saying as the years have gone by. As a trainer, I prefer Red rather than Blue. They are both iconic and great characters but Red's ominous aura just is more interesting. Who do you like more Red or Blue? I do like the theory that the main character caused the death of its Raticate (hence the reason why it is not present in its team below.



Model Details:
Pages: 2 -- 3 -- 6
Height: 3.75 in / 9.53 cm -- 6 in / 15.24 cm -- 9 in / 22.86 cm
Width: 1.54 in / 3.91 cm -- 2.47 in / 6.27 cm -- 3.71 in / 9.42 cm
Depth: 1.20 in / 3.05 cm-- 1.92 in / 4.88 cm-- 2.88 in / 7.32 cm
Download: 3D Model / Templates
Notes: This model is quite difficult to build. The bigger the model is, the easier the model is too build. Furthermore, build the model from the head down. When building the head use PEPAKURA VIEWER to see where all the pieces go. You can download the program for free just click the link that say "opens PDO" on the side of the website. Build the arms (by starting at the hand and working toward the bicep of the arm) separately and attach them when you reach them on the body. Unlike the arms, build the legs directly to the body when you get there. Place a small weight in each shoe, I used small erasers, to get the model to stand by itself. Besides that, I hope you enjoy building and stay tuned!😀