Friday, February 26, 2021

Chibi Regigigas


I remember be extremely excited to catch this Pokemon. I had got my hands on a copy of Emerald and went through the fun puzzles to catch the Regi trio. I transferred all of them over got my strongest Pokemon and headed straight to Snowpoint Temple. I was a little dumbfounded that Regigigas was level 1. But no biggie, I soft resetted grabbed some lower level Pokemon and eventually caught the Pokemon after a few try. I spent the next few days grinding up Regigigas to a reasonable level and was like yeah I think this Pokemon is ready to face strong Pokemon. I was ready to use it against the elite four. When I was younger I did not know about its ability slow start and how dampening this ability is on the Pokemon. When I was ready to face Aaron, I just kept getting knocked out and I immediately thought this Pokemon was useless and never used it again after that elite four run. I never even tried Regigigas after first the five turns of slow start to see its true power. Sheesh Regigigas's ability is like me not being able to comprehend anything the first 30 minutes after waking up. 

Pokedex Entry:
According to the Pokedex, Regigigas has the ability to tow continents. Wow... I did not expect that no wonder it has the ability slow start. After having to tow continents, Regigigas probably does not want to wake up from its slumber for like centuries. The other Pokedex entries state that Regigigas was believed to have shaped Regirock, Registeel and Regice out of clay, ice and magma. Wait. In Registeel's entry, it is stated that it was created in the mantle after tens of thousands of years of pressure but according to this entry, Regigigas created Registeel. So did Regigigas create part of Registeel place him in the mantle then tow continents over Registeel to bake it over tens of thousands of years and then was like I am going to take a long nap now? Because that is kinda of funny. Sounds like Regigigas's version of an afternoon project.

Model Details:
Pages: 3
Height: 4.50 in / 11.43 cm
Width: 7.16 in  / 18.19 cm
Depth: 3.26 in / 8.28 cm
Notes: Ok I won't be lazy with this entry. Build the model from the head down and attach the arms and shoulder pieces as you before you close the model. Close the model with a leg or the back piece behind the legs. You will need to build a stand, or use something to allow the model to stand as it will not stand up by itself. Besides that, I hope you enjoy building and stay tuned!

Tuesday, February 23, 2021

Chibi Regirock


This Pokemon was on my team one time I ran through Emerald and you know.... you had all the legendaries on your team as a kid. I think I used Regirock on a team in showdown once and it was fun running weakness policy, sturdy and drain punch. Overall, this Pokemon is pretty cool. Not like oh my god I love this Pokemon, but just a little better than cool. The main reason I remember this Pokemon is because someone asked me to make a Regirock and it took me...2 years. For any one who does not build papercrafts, the Regirock I was intending to build should not have taken any longer than a few days. The worst part was that I built half of the model and then I just did not finish building. I do not know why I just stopped but it kind of just layed on my table for 2 years and then one day I was like well I should probably finish building it. If you want to see it, it is in the picture of all my papercrafts in the about me/contact me section of the website.

Pokedex Entry:
Regirock's Pokedex entries just make sense. It had been determined that Regirock has no heart or brain (duh...makes sense it is all rock). Furthermore, if any part of its body is chipped away in battle, it attaches rock around it to repair itself. This explains its other Pokedex entry because it has been discovered that the rocks from its body was unearthed from all over the world.

Model Details:
Pages: 2
Height: 3.35 in / 8.51 cm
Width: 4.03 in / 10.24 cm
Depth: 2.42 in / 6.15 cm
Notes: Build the model head down and attach the arms and back pieces before you close the model. Close the model with the piece with no tabs on the first page. This should be the piece with no tabs that you would glue behind the legs. Lastly, this model can naturally stand with a slight angle. If you want the model to stand up close to 90 degrees, use the arms as a way to get the model to stand properly.

Friday, February 19, 2021

Chibi Regidrago


Hmmm.. let see we need to make a new Pokemon. What should we base it on? Charizard? Yeah that sounds like a great idea, but so it does not look too much like Charizard let us just make its head black. Despite me bashing Pokemon for reusing Charizard's model, I actually do not mind this design. A mystical or powerful creature finding shelter inside a skull of a dragon (haha not Charizard, but we all know this is what Pokemon is implying ūü§™) It seems to fit perfectly with the other Regis. Let me honest, I have no clue anything else besides this Pokemon... so yeah this section will be pretty thin regarding content.

Pokedex Entry:
The positive about making Pokemon from the Galar region is that there is only one or two Pokedex entry to talk about. Regidrago has a mythical Pokedex entry. According to the Pokedex, Regidrago is composed of dragon energy and has the powers of every dragon Pokemon. Seems very fitting for this powerful Pokemon. Also, it is unproven but Regidrago's arms were once the head of an ancient dragon Pokemon. Hmmm I wonder who this Pokemon it is refering to... Charizard (yes it is not a dragon Pokemon but you get the point) and if not who?

Pages: 2
Height: 3.50 in / 8.89 cm
Width 4.09 in / 10.39 cm
Depth: 2.00 in / 6.45 cm
Notes: Again I am too lazy to type this out again so just visit Paperpokes to see the notes I have for making these models. Besides that I hope you enjoy building and stay tuned.

Wednesday, February 17, 2021

Chibi Registeel


Well I had a pretty good excuse to use this Pokemon on my team... I got a shiny... from the Jubilife trade center from Platinum. Before everyone thinks well it is fake. Well I am pretty sure it is not because the Pokemon was caught in a timer ball and had some Japanese name. Furthermore, for Platinum I could not trade hacked Pokemon through Jubilife as I tried trading away one of my friends Pokemon, but the game kept crashing. I later learned the Pokemon was hacked so..... I believe this Registeel is legit. I will take a picture of it when I get my hands on my D.S or else anyone who reads this will think I am lying. And yes, I was confused when I saw that Registeel was a different color. And I just had a thought, who would want to trade a Shiny Registeel to a random person unless it was a prank from a friend? At the end of the day, I do not care I have a legit Shiny Registeel.

Pokedex Entry:
Geology! This is this Pokemon's entry. Registeel has the hardest metal in the world and cannot be stretched. These features have occurred because this Pokemon was tempered by tens of thousands of years in the mantle. I mean I took Geology but I thought it would take longer for this Pokemon to form to create such properties on this Pokemon. I can easily be wrong as I already forget most of up I learned in Geology, but I thought it would take longer. Also, how this Pokemon escape the mantle did it just climb out because I though rock left the mantle through volcano in the form of lava? I can imagine Registeel climbing through the rocks going like why is life so dark or going like I am almost there to whatever is up thereūü§™.

Model Details:
Pages: 2
Height: 3.15 in / 8.00 cm
Width: 3.86 in / 9.80 cm
Depth: 2.49 in / 6.32 cm
Notes: Build the grey parts of the head first located on page one. Then build, the inside the black part and finally free hand glue the face part to the head. You will need to trim the bottom part of the face so that it fits snuggly together. Finish building downward. In order to get the model to stand by itself, I flipped the pyramids inside out. Besides that, I hope you enjoy building and stay tune!

Friday, February 12, 2021

Chibi Regieleki


I like it. This Pokémon looks aesthetically pleasing I do not why. It may be the yellow symmetrical look mirror electric currents, but ehh. I really like the Pokémon company creating more Pokemon to go with past legendary Pokemon. I prefer this compared to new forms to old legendary Pokemon. cough** cough** Zapdos cough*** Moltres cough*** Articuno cough*** cough*** sorry I had to cough while you were coincidentally reading this. New legendary Pokemon to go with past legendaries just seems right as it creates new Pokemon while pulling on the string of nostalgic fans. Besides that, I actually have no clue if this Pokemon is usable. I believe this Pokemon acts as a glass cannon with its astounding speed stat and the option to be physically or specially attacking. The only thing I do not really like about this Pokemon is that it is two foot eleven inches. I feel like the Regis should be intimating figures, but this Regieleki cannot be intimidating when being so short.

Pokedex Entry:
Well, this section will be easy to type as there are only two Pokedex entries. According to the Pokedex, Regieleki has the power to generate all of Galar of electricity. Okay this makes sense. A powerful legendary Pokemon that provide enough energy for an entire region (that is not suppose to be sarcastic). Apparently, if you remove Regieleki's rings it will unleash its latent power. Wait, so can Regieleki generate all of Galar's energy with or without the ring's on because if Regieleki can power all of Galar's power with the rings on could Regieleki power the whole Pokemon universe or will it produce too much power to cause a blackout in all of Galar? Just food for thought.

Model Details:
Pages: 2
Height: 2.60 in / 6.60 cm
Width: 5.37 in / 13.64 cm
Depth: 1.51 in / 3.84 cm
Notes: Go read the notes on Paperpokes website. I am lazy and do not want to type it again. Besides that, I hope you enjoy building and stay tuned!

Tuesday, February 9, 2021

Chibi Ninetales


I have never used this Pok√©mon like ever. I was trying to think if I have ever used this Pok√©mon in any Pok√©mon series game and I kept drawing a blank. The main reason I probably have not used this Pok√©mon is because I owned FireRed. Ninetales was a game exclusive to LeafGreen, so I never had a chance to use this Pokemon. I probably replayed FireRed the most out of all the Pokemon games, so I never really built a connection with Ninetales and thus never used in the futureūü§∑‍♂️. I mean, in my Platinum game, I have a Ninetales when I attempted to complete the Pokedex, but I never used it. It is just chilling in the box doing cat things. I do have to admit I like the Alolan version of this Pokemon better than its normal form. 

Pokedex Entry:
According to the Pokedex, Ninetales was a creation from a merging of nine saints or nine wizards or nine noble saints, it depends on the game you read the entry from. This explains the number of tails it has and the naming of the Pok√©mon (Imagine the conversation people naming this Pok√©mon went. hmmm what should we name this Pok√©mon? Well, it has nine tales maybe we should just call it that. Well, we have 150 more Pok√©mon to name so I guess it works). Besides the explanation for the amount tails this Pok√©mon has, the Pokedex also states that this Pok√©mon is very smart and can live for 1000 years. Furthermore, this Pok√©mon is extremely vengeful. According to the early Pokedex entries, it is stated that if you pull a tail from Ninetales it will lay a 1000-year curse on you. Okay makes sense it is highly senstitve and does want to be touched. The problem I have is that a later Pokedex entry states that if you cross this Pok√©mon it will lay a 1000-year curse. So, what classes as crossing this Pok√©mon because I feel like that would depend on each Ninetales and the smallest thing could land you a 1000 year curse? Also, what is 1000 year curse? (I will let you use your imagination) Sheesh after these Pokedex entries no wonder why I never used this Pok√©mon. 

Model Details:
Pages: 2
Height: 2.40 in / 6.10 cm
Width: 1.70 in / 4.32 cm
Depth: 3.87 in / 9.83 cm
Notes: The model is not too tough. The only hard part is the tail. When making the tail, start with the piece with two tabs and build the pyramid (tail pieces). Then close the tail with the piece with no tabs. The tuff on the head of the model is not difficult to build, but I recommend building the piece on the top right first and then attach the piece underneath it and then close the tuff with the piece that has two tabs Besides that I hope you enjoy building and stay tuned!

Wednesday, February 3, 2021

Grand Saboteur Ninja Monkey (0-5-0)


I played a little bit of BTD 6 but I mainly played BTD5 a lot.... that means I have not really used this monkey in game. I have used the 0-4-0 ninja monkey a lot so I assume that this monkey is just a 0-4-0 ninja monkey on steroids. A monkey to slow down M.O.A.Bs, B.F.Bs, ZOMGs, and D.D.Ts. and provide adequate bloon popping power below. If I am using this tower wrong I would like to know how to properly use it.

Model Details:
Pages: 3
Height: 2.75 in / 6.99 cm
Width: 2.88 in / 7.32 cm
Depth: 2.50 in / 6.35 cm
Notes:  So... this model is not easy.  I will try to be as descriptive as possible when providing the instructions for this model. If you have questions feel free to put them in the comment section below. Now let's begin. First, I built the head. When building the head build the front part of the head then build the back part of the head but DO NOT close the back part of the head. Attach both pieces like seen below so that there is no gaps between the front and back of the head.
Next, build the ears and place them in the general area in which they are in the model. It is up to you whether or not you want to shorten the ears by trimming them. After that use the ears as a guideline to attach the grey/black band that covers goes across the face of the monkey. You will need to free hand glue it and the angle of the band is up to you.
Once you glue the band half way around, close the head and then glue the rest of the headband to the head. It is up to you whether you want to build the tie (I personally did not build the circular portion of the tie in the headband and would recommend building the tie before closing the model)

Once the model is closed. Build the orange piece and free hand glue it to the back of the head.
If you have built any of my previous models, building the body is the same as the others. If you have not built any of my other models (go build them but.....), build the body from the top down, and attach the arms as you build down. Then, free hand glue the legs to the body in which the legs just cover the square in which it is suppose to be. I put cut up eraser pieces in the feet but I don't know how much use they were in keep the model standing.  For this model in specific, attach the bag pack and then use the tail to create a tripod with the legs to allow the model to stand by itself. Attaching the tail is the last thing you should attach to the model. 

When building the backpack the rings do not go all the way around. Therefore, you will have to print an extra page and cut a small square out of the rings the same width as the other rings and then free hand glue it on the back of the ring so that it can wrap around the entire backpack. Hopefully, I explained that well enough, but here is the picture (the white circled part).

When making the fan YOU DO NOT have to cut all the little piece, I just cut them in a way where the fan in symmetrical so you can fold it on itself  and then just glue the white side. I did not use any tabs it is up to you if you want to use them
When making the waist band, do not cut the circle part of the waist band and do not cut the tabs just cut the black rectangle and attach the black squares to the black rectangle and then attach the waist band around the body 

For the "X" on the body, place the two part of X together but do not glue them together, see if the x-fits snuggly around the body. If so glue them in the fashion you made it. If not you will need to cut one of the x-pieces into two, trim them, and glue them on opposites of the other piece and see if it fits snuggly. Keep playing with the x until it looks nice.
Besides that, I hope you enjoy building and I hope my instructions are adequate enough to understand how to build it. If you have any question post them down below and I hope you stay tunedūüėĀ.