Saturday, September 25, 2021

Chibi Machamp

 





Commentary:
This Pokemon is quite cool. Its chibi on the other hand quite funny with the arms. I used Machamp in many different nuzlockes. Let me say, in my opinion, Machamp is amazing in Nuzlockes. Even though it is not the quickest, Machamp has a decent amount of bulk. Furthermore, Machamp can provide amazing type coverage learning fighting type moves (well duh its a fighting type Pokemon) like Dynamic Punch, Brick Break, and Cross Chop, the elemental punches, as well as flamethrower (if you want it for some reason), cross poison and earthquake. Even if you do not want to rock that you can always teach it bulk up and sweep or run guts. FOR A NUZLOCKING stand point I think Machamps is a great Pokemon due to its versatilty.

Pokedex Entry: 
Well Machamp is the master of master art. It is known to be able to throw 1000 punches in two seconds. Furthermore, one of its arms can move mountains😅. HUH WHAT?!?! Unfortunately, due to its enormous power, if  Machamp cannot due to any precise work due to its clumsy fingers. Alright, Machamp is a powerful Pokemon that is not good at small details.

Model Details:
Pages: 1
Height: 2.90 in / 7.37 cm
Width: 1.88 in / 4.78 cm
Depth: 2.05 in / 5.21 cm
Download: 3D Model / Templates
Notes: There is a few notes you need to know about when making the model. When building the head piece, you will need to free hand cut them so that they fit snuggly onto the head. It is up to you how tall or short they are. Furthermore, in order to get the model to stand by itself, you will need to dent the legs of the model so that a flat surface is created. If you need an example, what it should look like look at the picture of Paniward. Besides that, I hope you enjoy building and stay tuned!

Wednesday, September 22, 2021

Chibi Serperior

 





Commentary: 
I love this Pokemon's hidden ability: Contrary (in combination with leaf storm). I never actually got my heads on one of these Pokemon in the main series, but the amount of times I was able to sweep with Serperior in showdown is quite a lot. I would run leaf storm, dragon pulse, hidden power fire and leech seed. I do not know how viably competitive this set would work, but it would work miracles against my friends and at the end of the day that is all that matters.





Pokedex Entry:
According to the pokedex, Serperior can stops its opponents with just a glare, and only gives its best effort to opponents that are not fazed by its glare. I kind of wonder what it glare is to be so intimidating? Furthermore, Serperior takes in solar energy to boost itself internally. What?!? so it goes from Snivy able to use photosynthesis to Servine not being able to photosynthesis to Serperior being able to use solar energy (maybe like a solar panel). I do not understand that one.

Model Details:
Pages: 1
Height: 2.85 in / 7.24 cm
Width: 1.75 in / 4.45 cm
Depth: 4.03 in / 10.24 cm
Notes: This model is not too difficult. Just when getting the model to stand, place a small weight inside the body and make a small dent in which you want the model to stand on. I have included the video of me making the model down below. Besides that, I hope you enjoy building and stay tuned!
Download: 3D Model / Templates


Saturday, September 18, 2021

Apex Plasma Master (Dart Monkey Paragon Monkey)

 






Commentary:
Pretty cool upgrade. I like how the basic dart monkey has one of the strongest upgrades at the moment of writing this. I find it kina of funny it shoots purple spike balls, just does not seem like a natural things to use as a projectile, but hey whatever. The only thing I dislike about this monkey is that you cannot get it in sandbox mode.... so I had to play quite a bit to get the 3D Model, I know a very petty dislike.

Fun fact: 
The only way to get a level 100 Apex Plasma Master, you have to play co-op so multiple tier 5 dart monkeys are sacrificed.

It is also recommended to use the Apex Plasma Master in maps that have a lot of walls because its balls bounce more maximizing its damage

Entry:
According to BTD6, the Apex Plasma Master is a high-tech ballista operator. It sits on the seat of an orange-technically advanced ballista, firing plasma juggernaut balls from the crossbow every time it attacks

Model Details:
Pages: 6
Height: 5.90 in / 14.99 cm
Width: 4.21 in / 10.69 cm
Depth: 4.20 in / 10.67 cm
Download: 3D Model / Templates
Notes: This model is not too difficult to build. I have included a video of me building the model. Unfortunately, I am at a different location, so sorry for any problems with me building off screen. Anyways... first build, the monkey and then the red and blue tubes. Then build the crossbow section (not the legs) and attach the tubes and monkeys together. DO ALL of this before closing the model. Place as many weights into the crossbow until the model can stand on its own. After that, build all the legs. Make sure they look very similar too each other (angle of each piece of the leg) and everything is tightly glued. Once tightly glued, glue each leg one at a time at the corner of the bottom of the crossbow. Make sure that each leg is tightly glued before moving on to the next one. I decided not to record this part of the video because it would just be a lot of waiting for the model to glue so... yeah. 
Besides that, I hope you enjoy building and stay tuned!





Wednesday, September 15, 2021

Chibi Servine

 





Commentary:
I do not know why but I feel like I used this middle stage Pokemon more than any other one. Maybe because it seemed half usable🤷‍♂️. I don't know, I just remember a lot of Leech Seeds and Leaf Tornados were spammed when using Servine and that I was able to comfortably sweep Clay's team with this Pokemon in both Unova games.

Pokedex Entry:
According to the Pokedex, moves along the ground as if it was sliding. It befuddles its foes and it then attacks with a vine whip. Furthermore, when it evolves into Servine it loses its ability to photosynthesize as thus always keeps itself clean. I do not how photosynthesis relates to cleanliness, but I am not a plant so who knows.

Model Details:
Pages: 1
Height: 2.60 in / 6.60 cm
Width: 1.14 in / 2.89 cm
Depth: 3.47 in / 8.81 cm
Notes: This model is not too difficult to build. Just place a weight in the model to get the model to stand by itself. Also, I made the arms and leaves 2D rather than 3D. I have included the option to make them 3D, but I find it easier to make them 2D. Down below I have included the video of me making this model. It would greatly appreciated if you could subscribe, but besides that, I hope you enjoy building.
Download: 3D Model / Templates





Saturday, September 11, 2021

Chibi Kyogre

 




Commentary:
I never understood why Groudon decided to fight Kyrogre in the water. I mean it seemed as if Groudon was fighting on Kyogre's home turf and that Groudon was fighting on one of those pool floaties against Kyogre. Despite Groudon's stupidity, I still prefer Groudon over Kyogre.  Also, how did Maxie and Archy manage to mess up their jobs so badly that they mixed up the colors for their desired Pokemon? I never understood that one; they must have been color blind or something. In my opinion, Groudon is better than Kyogre just becasue it looks cooler that's all, but I have to admit Kyogre has a better shiny than Groudon I do not what else to say, but here are some cool facts about Kyogre that you probably did not know. 



Fun Facts:
Kyogre and Groudon were based on the myth of Leviathon and Behemoth. Furthermore, Kyogre's name is the combination of the word ocean and orca (I mean duh orca's live in the ocean). Lastly, Kyogre in the Pokemon Dungeon games, it has the ability to fly. HUH? 

Pokedex Entry:
According to the Pokedex, Kyogre has widen the sea by causing downpours and it is in conflict with Groudon. It sleeps in the Marine Trench. Nothing to special. I am pretty sure everyone already knew this, but it is just confirmed by the Pokedex. 

Model Details:
Pages: 2
Height: 1.75 in / 4.45 cm
Width: 4.69 in  / 11.91 cm
Depth: 4.91 in / 12.47 cm
Notes: Build the model from the front back closing it at the tail. You may want to make a small dent at the location you want the balance the model at and place a weight inside to get the model to stand by itself. Besides that, I hope you enjoy building and stay tuned! 
Download: 3D Model / Templates

Wednesday, September 8, 2021

Chibi Snivy




Commentary:
This is my favorite Unova start out of the three. It just has this arrogant look that gives it an edge over the other typically cute look and I love it. I did have a problem beating Chili in Pokemon Black because I did not know I could get a free Panpour to beat him😅. After getting constantly beaten by Chili, how did I beat him? Well, I just started talking to everyone I possibly could and I eventually got the free Panpour and beat Chili. Pretty anti-climatic, but I did beat Chili on my first try after I got Panpour. Also, those yellow things coming off its back are suppose to resemble leaves or wings. Wings did Snivy have natural selection and be able to fly? Or is it in the process of natural selection?

Pokedex Entry:
According to the Pokedex, Snivy can photosynthesize by bathing their tails in the Sunlight. Well, I guess like Rowlet, another grass starter animal has the ability to photosynthesize🌻 which I still find quite unusual. Furthermore, Snivy can move swifter after being exposed to sunlight and can use its vines better than its hands.

Model Details:
Pages: 1
Height: 1.85 in / 4.70 cm
Width: 1.09 in / 2.77 cm
Depth: 2.79 in / 7.09 cm
Notes: Down below, I have included the video of me making the model. It is not too difficult to build but if you are interested in building the model with me I would recommend playing the video at .25 speed. Besides that, I hope you enjoy building and stay tuned!
Download: 3D Model / Templates


 

Saturday, September 4, 2021

Glaives Dominus Boomerang Monkey

 





Commentary:
I don't know anything about this monkey. I am assume it is just very powerful, being 5-5-5, and have aspects of other fifth tier boomerang monkeys. That is it.

Entry:
According to the bloons wiki for this monkey, the Glaive Dominus combines the major features of each of the fifth-tier monkey (just like I thought). It throws super powerful ricocheting glaives, like the perma charge, possess a orbital glaive ring, like the glaive lord, and throws heavy exploding glaives knockback glaives at blimps. Yeah it is just an ultimate boomerang monkey that has the abilities of each boomerang path and does a lot a lot of damage.

Model Details:
Pages: 5 -- 14
Height: 3 in / 7.62 cm -- 6 in / 15.24 cm
Width: 4.09 in / 10.39 cm -- 8.18 in / 20.78 cm
Depth: 4.25 in / 10.80 cm -- 8.49 in / 21.56 cm
Notes: I have included two different sizes for this model. The bigger one is probably easier to build compared to the smaller (I built the smaller one). Down below I have included a video of me building the model. If you want to build it with me I recommend that you follow along and play the YouTube video at .25 speed.  THE ONLY THING I FORGOT TO INCLUDE IN THE VIDEO is to when closing the body (starting at 8:00 just skip to 9:00). The only reason I kept it in is because it inlcudes how to build the neck piece. It would be greatly appreciated if you subscribe to my channel as this video took me the longest for me to edit in order to amend my building errors. Besides that, I hope you enjoy building and stay tuned! 
Download: 3D Model / Templates




Wednesday, September 1, 2021

Chibi Mega Charizard Y

 




Commentary: 
Mega Charizard Y seems the natural/ more fitting Mega evolution than Mega Charizard Y. The color palette stays the same and the general Charizard build just gets an update. I do not know much about how Mega Charizard Y did in VGC, but I believed that it was much better than Mega Charizard X because of its ability drought eventhough it takes 50% from stealth rocks 😅. Looking at Smogon, it ran flamethrower, focus miss, solarbeam, and defog. I do not know if this set was good, but it was the only one on Smogon.




Pokedex Entry:
According to the Pokedex, Mega Charizard Y boasts speed and maneuverability greater than those of a jet fighter. Uh okay? 

Model Details:
Pages: 3
Height: 2.95 in / 7.49 cm
Width: 3.85 in / 9.78 cm
Depth: 5.13 in / 13.03 cm
Notes:  This model is similar to Mega Charizard X's build. Down below I have included a video of me building the model, so if you have any questions refer to the video.
Download: 3D Model / Templates


Saturday, August 28, 2021

Burned Tower





Commentary: 
For those who actually pay attention to the model numbers I forgot 130. If you look at it chronologically this will make no sense, but I have to fix my mistake somehow. Anyways, this section is going to be really bare. Cool fact is that the burned tower use to be the home for Lugia before it was destroyed.

Ho-oh     Lugia     Entei     Raikou     Suicune



Model Details:
Pages: 18
Height: 7 in / 17.78 cm
Width: 11.21 in / 28.47 cm
Depth: 9.37 in / 23.80 cm
Notes: This model is not too difficult to build, it is just big. First, build the structural walls and then build the roof. Once the walls are attached to one another and the roof is built, attach the walls to the roof. Next, build all the miscellaneous wood planks and attach them in the general spot they are suppose to be. Lastly, build and attach the grey platform. Besides that, I hope you enjoy building and stay tuned! 
Download: 3D Model / Templates

Wednesday, August 25, 2021

Chibi Feraligatr

 



Commentary:
I'm surprised that Feraligtr evolves so early at level 30. I remember I was climbing the light house to get to the Ampharados in Soulsilver and after a battle Croconaw began evolving. I was completely surprised as I knew that Typhlosion evolved, so I thought the game was making a mistake, but no Croconaw evolved at level 30. I do have to admit, out of the Johto starters, Feraligtr, in my opinion, is the best as it gets great type cover in game as it can naturally learn crunch, ice fang, superpower and aqua tail, and has a cool shiny to go along with it. Side note, one of my first run-throughs of Soulsilver, it somehow managed to survive Lt. Surge's Raichu thunderbolt on six hp while being five levels lower than Raichu. Don't know how but it did. 

Pokedex Entry:
Well, Feraligtr has some intimidating Pokedex entries. According to the pokedex, to intimidate its foes by opening its mouth, followed by kicking its POWERFUL hind legs to charge at an incredible speed. Furthermore, when it bites its opponents with its massive jaw, it shakes its head and savagely tears its victim up. Alright quite an intimidating Pokemon. What I do not understand is that according to the original Pokemon Silver entry, Feraligtr has a problem supporting its own weight out of water and thus it must get down on all fours. Two things. One, unless I am mistaken, I have never seen a sprite of Feraligtr on all-fours as it normally stands on its two hind legs. Secondly, I thought that Feraligtr has powerful hind legs. I mean it is specifically stated in its entry. I guess not powerful enough to stand on then. 

Model Details:
Pages: 1
Height: 2.80 in / 7.11 cm
Width: 1.53 in / 3.89 cm
Depth: 3.04 in / 7.72 cm
Notes: This model is not too difficult to build. I have included a video of me building the model down below so go watch the video if you need help. One thing not to clear in the video is for the teeth, I just took scrap paper and cut triangles out of to make the teeth. I then glued the teeth in the general location in which they are supposed to be located at. The option is there to make the teeth 3D but making it 2D just saves more time. Also, put a weight in the model to allow the model to stand by itself. Besides that, I hope you enjoy building, subscribe, and stay tune! 
Download: 3D Model / Templates


Saturday, August 21, 2021

Chibi Blaziken

 




Commentary:
Speed Boost Blaziken. I have swept many people on showdown with this Pokemon. Interesting fact, Blaziken practices Martial Arts. Did not think that forms like these would exist in the Pokemon Universe, but hey they do.

Pokedex Entry:
According to the Pokedex, Blaziken flames comes out of with its wrist and its fiery punches scorches its foes. Okay make sense. What I did not expect as that Blaziken had the ability to jump over 30 story buildings. HUH?! Blaziken does not look like it has the capability to do that, but hey it is a fantasy game so I guess anything is possible.

Model Details:
Pages: 1
Heights: 2.80 in / 7.11 cm
Width: 1.94 in / 4.93 cm
Depth: 1.95 in / 4.95 cm
Notes: Build the the head, torso and leg section separately. Then glue them all together. Lastly, you the two cones and attach them (one on each leg) to get the model to stand by itself. Watch the video if you have any problems building the model. Besides that, I hope you enjoy building and stay tune!
Download: 3D Model / Templates